blogs

  So, you have suddenly realized that your brake lights are not working. This is no good—not only it is dangerous to be driving around the area with no lights to signal when you are pushing your brakes, but one day you can get caught and you will find yourself with a ticket. Sometimes your brake lights don’t operate while the tail light work or vice versa. The first thing that you need to do when troubleshooting your rear lights is to get to know their working.   Taillights are a type of light fitted in a vehicle which are fixed at the back part of a vehicle. They are bilateral structures – meaning they are in pairs and are of different types and they also perform different functions. The main reason that highlights the importance of the taillights is to do with the safety of the drivers on the road. The red light which are at the back are indicating driver’s actions during driving to other drivers on the road. They help in avoiding confusion to drivers on the roads and help in informing other motorists of your intentions. These include braking, turning intentions, and the shape and position of the vehicle when viewed by other drivers from a distance. You can also turn on the hazard lights in the event of an emergency as well as the headlights. Still, both the front lights and the taillights of a vehicle are often only inspected after they are broken or an accident has happened. Ideally you must check the functionality of the lights every three months. Here are three real-world guidelines on how to inspect and repair your car’s taillights. Read on further to know how to resolve this crucial issue before you become a part of an accident. Detailed Procedure to Test and Replace Tail Lightss 1. Testing your taillights It is very important for you to test your tail lights on your car before you get to move on the road. To do this you need an assistant to tell you whether the lights are on or off. This is best done at night since it is easier to observe this in the dark especially when using artificial light.   Make sure the tail lights brighten and remain on for two occasions: (1) when applying brakes and (2) when the headlights are on. Moreover, you have a visual test on the tail lights themselves for signs of cracks, dry-rotted seals, and leaks. One should be careful with oxidation since it is difficult to reverse and involves replacements. All these are essential in as much as they help in retaining the value of the car for a longer period and your safety on the roads. 2. Replacing taillight bulbs   Needless to say, you should turn a blind eye to the issue of replacing your tail light bulbs if they are dead. Remember that the next part is a bit simpler and easier which is the removing of the bulbs. All that is required of you is to disconnect the electrical pigtail wiring and make sure that you take out the bulb very carefully. The bulb rotates and it has a tendency to come off from the metal contact housing this time. There is, however, one thing to be noted, that you should not touch the new bulbs with your hand. This is because, there is a buildup of natural skin oils which, when exposed to the light bulb when on, can greatly shorten the life of the tail light bulbs of your auto. 3. Replacing taillight assemblies Tail light assembly is, therefore, the set of lights found at the back part of your car. The fittings for the tail light assemblies are normally hidden behind the trunk interior material such as the carpet. In order to get access to the assembly, you will need to lift the trunk interior material liner, you will see couple of nuts that must be unscrewed and removed. When all the retaining nuts are removed, the old assembly should come out easily, as shown below. Then, you can have the new assembly positioned in the place. Finally, it is unadvisable to ignore the functioning of your car’s taillights as it might lead to their dysfunction. As highlighted in the practical tips above, follow the procedures on testing of tail lights, the light bulbs and the assemblies. Conclusion Tail lights are important for your safety on the road because they are used to communicate your presence and your intentions especially when you are driving in the night or in unfavorable weather conditions. This is one of the simplest, but very important tasks that a car owner should perform periodically. The function of dimming, flickering or complete failure of the lights can thus be detected before it affects your safety or cause an accident that may attract a ticket from a police officer. In case of any problems with the bulbs, fuses or problems with wiring, it is important to correct these as soon as possible so as to make the vehicle visible and safe to be on the road.  

When upgrading your car, you will likely consider the power, new look, or even the newest technology. However, one of the most important safety features, namely, the tail lights of your car, can be easily ignored. Built-in incandescent tail lights have been used for as long as one can remember, while LED taillights are superior. LED tail lights are advantageous since they increase car safety, power usage, and performance. In this blog, you will discover why your car requires LED tail lights now and why this type is more effective than conventional ones. Energy Efficiency A significant advantage for the owners who decided to modify their cars with LED tail lights is the energy-saving aspect. The commonly used tail lights are incandescent bulbs, which consume much energy through heat production. On the other hand, LED (Light-Emitting Diode) lights are much more efficient in using electrical energy because they use nearly all of this energy to produce light. This leads to reduced power consumption, which is helpful in electric and hybrid vehicles, whereby power conservation is of paramount importance. Improved Visibility as A Factor That Reduces Safety Risks The most important consideration for a car’s lighting should be safety since LED tail lights provide better illumination than older bulbs. LED lights are more luminous than traditional car lighting, thus enhancing your car’s visibility for other drivers, especially when driving at night or during a rainy, foggy, or snowy period. This causes your vehicle to be easily noticed from a distance, thus minimizing the chance of an accident, particularly a rear accident. Aesthetic Appeal and Modernization In addition to practical uses, LED tail lights also improve the look of your car. They are a more recent product that makes your car look considerably neater, smoother, and more technologically advanced. Several car makers have incorporated LED tail lights in their current models since they are trendy and have recently developed compact, sleek designs. LED lights are also available in different shapes, sizes, and colors, thus the flexibility aspect. Most aftermarket options have more dynamic features, including sequential turn signals, to make your car more glamorous. Regardless of the car model employed, installing LED tail lights is one of the easiest ways of enhancing the car's look. Environmentally Friendly Choice As the world becomes more environmentally aware, it is more important than ever to try and make those small changes to use less energy. LED lights are energy-efficient and environmentally friendly since they have a longer lifetime. Because of their longer life span, fewer LED lights are likely to end up in the dustbin compared to incandescent bulbs that burn out quickly and need replacement. Furthermore, they consume little power, indirectly decreasing your car's fuel utilization and, thus, emission levels. Choosing to change the LED tail lights is not a luxury but an investment because not only does it improve your car's performance, but also an environmentally friendly measure. Reduced Costs in the Long Term Nowadays, LED tail lights are a costlier invention than unchanged stern incandescent bulbs. However, they are cost-effective and assured of high yields after a long time. They do not require frequent replacement and repairs, reducing replacement costs and labor. Furthermore, their efficiency can result in slight yet apparent fuel or battery usage improvements over an extended period. A different way of saving costs is that there are relatively small chances of being given tickets for not functioning or non-existent rear lights. Due to the durability and longer life of the LEDs, fewer cases of sudden failure would lead to fines or accidents. Overall, one can easily conclude that the extra cost of purchasing LED tail lights could be recovered in the long run. Easy to Install and Maintain LED tail lights are relatively easy to install for those who like their car modified by their efforts. Most of the available aftermarket LED tail lights will connect to the vehicle as quickly as plugging into a wall socket since some do not require additional tools and skills for installation. This makes them an excellent upgrade for people who wish to enhance their car and not necessarily tow it to an auto mechanic. LED tail lights do not need much attention when it comes to maintenance in most instances; they do not require any. This reliability implies that, once integrated, they will continue to operate in the desired manner for years with little or no maintenance. This is especially so when compared to incandescent bulbs that not only need frequent replacements because they rarely last very long but also easily break. Conclusion If you want to enhance the look of your car, changing your tail lights to LED is one of the best things you can do. The benefits of integrating LED tail lights are very apparent in terms of safety and energy efficiency, aesthetics, and long-term costs. If one wants to improve the fuel efficiency of his car, enhance its performance, or give it a stylish look, LED tail lights are a perfect fit and come with numerous benefits. This is the right time to prepare and upgrade to future cars.

Do you ever get puzzled as to what could be wrong with your automobile when your tail lights are not functioning but your brake lights are? Not only you, this common issue can make many drivers wonder what happened that their car’s visibility to other drivers has been affected? Don’t worry. You are in the right place as this article will provide you with all the details about why your tail lights are off. Thus, whether you are a passionate car lover or are simply interested in the upkeep of your car, we encourage you to continue reading to learn about the potential causes and ways to fix your tail lights.  Tail Light Bulb is Fused If your tail lights are not working while the brake lights work perfectly well, then most probably, it is a result of non-functional tail light bulbs. In many vehicles, brake light and tail light use the same dual filament bulb light source for both functions. Therefore, if any of these filaments has been damaged, the tail light will not work while the brake light will still be working.  Replacing a tail light bulb is straightforward: Just use Do-It-Yourself or DIY method of dealing with the problems.  1. Access the Tail Light Housing: Find the position of the tail light housing, which can be in the trunk or the rear panel.  2. Remove the Housing: Pop off all screws or clips that are holding the housing part.  3. Replace the Bulb: Hold the bulb gently and remove it slowly, then put a new one in its place. Make sure the bulb type is right for your car’s make and model.  4. Reassemble: Take the housing apart and reassemble it, activating the lights.  Blown Fuse  Another reason which may lead to tail lights not working while brake lights are working is a blown fuse. The fuse serves as the safeguard of the light circuit from overcurrent. This way, if it blows, the tail lights will not be working. To diagnose a blown fuse  Let's have a look on how to diagnose a blown fuse. 1. Locate the Fuse Box: Often located under the dashboard or in the engine compartment of the automotive vehicle.  2. Identify the Tail Light Fuse: Consult the car’s manual to determine the way you can access the tail light fuse.  3. Inspect the fuse: Look for a broken wire inside the fuse or scorching signs in the fuse that will help you determine if it needs replacement. You can also use a multimeter to test it for continuity, too.  Replacement of a Blown Fuse  Now, Let's see the replacement of a blown fuse 1. Remove the Faulty Fuse: Pull the defective fuse out with the help of a fuse puller.  2. Replace with a New Fuse: Take it out and put in a new one of the same amperage.  3. Test the Tail Lights: Switch on the car lights so that one can confirm that the tail lights are effectively functioning.  It is advisable to check on your fuses frequently so as to avoid a situation whereby your tail lights fail at one time. Wiring Issues  Another common issue is wiring problems which can also result to your tail lights becoming non-functional while the brake lights are still operational. If wires are left over time, they may be frayed, loose, or even corroded, and this may lead to electrical issues.  Repairing Damaged Wiring  Repairing can be a difficult task. Not everyone is capable of doing it but our article let you know about it. Let's have a look at repairing damaged wiring 1. Disconnect the Battery: Whenever you are dealing with the electrical connections, make sure that you have disconnected the battery.  2. Repair or Replace Wires: You can just use the electrical tape to fix the minor problem if it is a small part of the wire, then cut it and replace that part of the wire.  3. Reconnect and Test: Connect the battery and the lights again to confirm the repair was affected.  4. Wiring maintenance: It is very important in ensuring the smooth functioning of your vehicle’s lighting system.  Faulty Switch The headlight and tail light switch are incorporated into the dashboard light switch. A switch may fail to work in a way that the tail light does not work while the brake light will work.  Replacement of Faulty Switch If the switch is faulty:  1. Remove the Switch: Take the switch out from the dashboard.  2. Disconnect the Wiring Harness: Pull off the connectors from the switch so that you can have clear access to the wires.  3. Install a New Switch: Replace a switch and restore the connection of the cables.  4. Test the Lights: Switch off the lights and then switch it on to test if the new switch functions as expected.  It is, therefore, advisable to test your light switch frequently so as to avoid being caught off-guard if the lighting system fails.  Light Sockets Corrosion Over a period of time, the tail light sockets are likely to get corroded owing to exposure to moisture and dirt. This corrosion may make it difficult for the bulbs to make a proper connection hence making the tail lights non functional. If you find corrosion:  1. Clean the Sockets: Take the sockets and remove rust and buildup with the help of a wire brush and contact cleaner.  2. Replace if Necessary: If cleaning does not work, then the solution would be to replace the socket.  3. Test the Lights: Check whether the lights are working correctly by testing them. The sockets of the tail lights must be clean and corrosion-free in order to provide the best operation. Conclusion These problems can be avoided and your tail lights will function properly if you conduct routine check up, cleaning and change of parts when due. It is not only safe but also legal requirements to ensure that you keep your vehicle’s tail lights in good condition.   If you carefully read these tips and guidelines, then you will be able to maintain your vehicle properly and safely on the road.

A rear bumper is one car part that is permanently damaged during  an accident involving the rear part of the vehicle. A rear bumper can easily get damaged during a low-speed impact as well. Nowadays, most bumpers are made of plastic or carbon fiber, which gets dislocated easily. In the event of such an accident, replacing a bumper is something that should be done immediately, as a damaged bumper spoils the look of the car. Replacing a bumper may seem like a monumental task, but it is quite easy, and you do not need to visit an auto mechanic as the bumper is a part that can easily be detached and reattached once you know the way.  In this blog, we will give you a step-by-step process on how to replace a rear bumper yourself. This way you will avoid the hefty fees that an auto mechanic will charge for the service of replacing the bumper.  Why is a Rear Bumper Important? A rear bumper is an essential component of a vehicle for several key reasons:  Safety: The main task of a rear bumper is to act as a shock absorber and reduce the force in case of rear impact. It has the effect of decreasing the force of the crash and in the process, safeguarding the outer structure of the automobile as well as individuals within the car.  Protection of Vehicle Components: The rear bumper protects some of the car’s important parts for example the boot, rear lamps and exhaust pipe from minor impacts. This protection is useful in avoiding expensive repairs that may be occasioned by direct impacts to these parts. Step 1: Buying the Right Tools and Parts First and foremost is that you should purchase the bumper that is compatible with the car model. The bumper should match the paint of your car. For bumper replacement you will need a screwdricer and a wrench. Searching the bumper that fits your car is essential and choosing the right one can be difficult since there is very little difference in the bumper within a car brand's lineup and you can easily buy the wrong bumper of the wrong car variant. The best way to avoid this mistake is to check your Vehicle Identification Number (VIN) and then look up used and new parts online regarding the VIN of your car. If you are buying a new bumper, it is better to purchase it from an authorized parts dealer of the car brand.  Once you have sourced the parts, then you are ready for the next step. Step 2: Removing Damaged Bumper This involves opening the car boot. After this you should look for the plastic trim or clips that covers the bolts that hold the bumper in place. To reach the bolts, you have to pry the bumper off by removing the clips. A flat-head screwdriver can be used as a clip-removal tool. Insert the clip remover between the clip head and pop it open. The clips extend to the wheel arches, so you need to get under the car to pop those clips open. Once you have removed the trim clips, you will see the bolts that securely attach the bumper to the car. Remove the screws or bolts b using a screwdriver and slide the bumper off the car.  Step 3: Attaching Removing and Attaching Reflectors Many rear bumpers have reflectors. Yow will have to remove those from the old bumper and screw them to the new bumper before you attach the new bumper to the vehicle. Removing the reflectors is a piece of cake. You just have to unscrew them and remove them and then screw them into the nbrand new rear bumper.  Step 4: Installing in the New bumper At this stage, you will need the assistance of another person. Open the boot of the car and make your partner hold the bumper in a fixed place. Make sure that the bolts are aligned with the holes as the bumper is held in the fixed place. Moving on, just use the wrench to tighten the bolts. Once that is accomplished you reattach the plastic clips, covering the bolt. Next, you have to put the screws under the wheel arches. Once the new rear bumper has been screwed on, you should inspect whether it is securely attached by pushing downwards to see if the screws are sufficiently tight or not.  Conclusion Once you've changed your car's bumper, all you have to do is drive around safely, knowing that the occasional bump or prang will not damage your bodywork. It's that easy. All you have to do now is try to keep other drivers from rear-ending you.

Protect your vehicle's fender from debris and corrosion with durable, customizable ABS fender flares that enhance off-road performance and improve resale value

Quality is the main element that defines how good a product is. Likewise, every product’s life depends on it. When we discuss auto parts, the first thing that comes to mind is performance. That performance means how compatible it is, and how long it will perform well. All these factors depend only on the quality of the material used for its production. Also, the selection process is quite lengthy depending on the type of part. The more critical it is, the longer time it will take for selection. Choosing XinZhino Tech for your vehicle’s auto parts will benefit you a lot. The reasons are many, which are mentioned below. You will know why you need to choose this supplier, and why quality matters. It Brings More Compatibility and Functionality The compatibility comes when you choose a higher level of compatibility. If an auto part is not compatible enough, that means it lacks quality. An auto part with high quality is defined by the amount of functionality and compatibility in it. All the functions will work at an optimum level only if the quality level is high. A poor quality of a part will cause problems like poor functionality and drawbacks. That part will not work the way it is supposed to do. You can have an idea of its performance through the functions it has. If there are bad functions, that means you will have to replace that auto part.  When people purchase anything, not only auto parts, they look at the quality. This is the first thing that defines the worth of anything. In the case of automobiles, no one goes for poor quality. They know that the failure will end up with a breakdown. People hate it when their vehicle breaks down in the middle of a road. The only reason they choose quality over quantity is the fear of problems they might face in their automobiles. XinZhino Tech can assure you of such compatibility and functionality. Safety of Automobiles and Passengers If you go into detail, a superior quality will create safety for passengers. Can you expect a poor-quality tire to survive long, especially in rough conditions? No chance, because that poor quality will make that tire give up any time anywhere. So, you will suddenly think about the safety of passengers because that auto part with lack of quality will give up soon. The safety of your automobiles as well as passengers comes when you go for higher quality. It ensures the longevity of the part since the material used for the production can support it. Another thing is the safety of passengers which is the most crucial thing. Your passengers will not decide to travel in a vehicle that is equipped with poor-quality parts. These auto parts will collapse anytime, which will be a nightmare. This nightmare is not what anyone wishes to experience. No person in the world wants their vehicle to collapse at night in the middle of a road. To avoid such scenarios, you need to focus on quality more than price. Even if the price is a little higher, at least the quality will not be compromised. Surety of Long-Term Performance Again, the long-term performance will come if the quality is not compromised. You can expect a low-quality auto part to collapse soon but not a higher-quality part. That will definitely show the best performance in a longer duration. People who install auto parts whether for exterior or interior, inspect the quality level. This makes them decide better what to choose in the right way. To get the surety of long-term performance, one needs to invest in quality.  Paying a higher price for the best standard will lead to long-term performance. People like to recover the cost of purchasing expensive goods. In the case of auto parts, they do the same. It is about making their automobiles get top-standard parts. This means the performance will be high for many years or for months depending on the usage level. No auto part can last long enough unless you purchase a top-grade part for your vehicle. This long-term performance is directly related to the quality. Overall Condition of Automobile and Resale Value  You might not use your automobile for many years. Maybe you sell it for a newer model or different type of automobile. This is where the quality will be highlighted again. If you want to have higher resale value, invest in high-quality auto parts. People inspect everything when purchasing second-hand goods, especially automobiles. Since automobiles are among high-end products, people look at every detail when purchasing them. This is why they are called high-involvement goods. So, remember to install auto parts in your vehicle that can perform really well.  XinZhino Tech has auto parts that can improve the resale value very well. This will affect the resale value of the car or truck you sell. Buyers who look at the overall condition know what kind of part needs replacement. Instead of seeing your car or truck getting rejected on resale, install high-standard parts in it. Higher Resistance Against Environmental Threats  The last reason why you should focus on quality is the resistance level of the parts. Auto parts are of different materials and their resistance levels may vary. However, you can keep their resistance level high by using the top-notch parts for it. For instance, if you install metal parts of low-resistance metal, they will not survive long in harsh weather, Environmental threats can cause massive corrosion on them. Moreover, if the temperature is extremely high in your region, you might see its impact on plastic and rubber parts. This is why you will have to focus on the quality.  Environmental threats can reduce the performance of auto parts that are made of plastic, foam, and rubber. UV rays can penetrate through them to cause serious damage. However, if you install high-quality parts with superior standards of material, you may get different results. These results will show that your automobile can perform well in different conditions.   XinZhino Tech can be your partner in making your trucks and cars up-to-date. An automobile parts supplier is so essential for auto repair companies in every age.